一、 Storage
1. During storage, waterproof packaging materials should be used to secure the conveyor belt
Wrapped up, it should be kept clean and avoid direct contact with ozone, strong light
High temperature, acid, alkali, oils, plasticizers, organic solvents, etc. affect transportation
Contact with substances with product quality to avoid direct exposure to rain, snow, and accumulated water
Etching. 1 meter away from the heat source.
2. When storing conveyor belts, the temperature inside the warehouse should be kept between -15 ℃ and+40 ℃
The relative humidity should be maintained between 50% -80%.
3. When storing conveyor belts, they should be placed horizontally in rolls and should not be folded or placed
On a flat and dry ground. During storage, it is advisable to flip it once a quarter.
二、 Hoisting and transportation
1. When lifting with a roll, it is advisable to insert a steel rod with appropriate strength
With the central hole of the coil, use wire rope or iron chain to expose the exposed part at both ends of the steel rod
Firmly connect, balance lifting, and prevent mechanical damage.
2. Forklifts can be used for short distance transportation, but care should be taken to avoid carrying rolls
The outer layer was stabbed. In the absence of mechanical use, it is also possible to
The conveyor belt rolls along the ground, but it should be ensured that the ground does not damage the conveyor belt.
三、 Use and maintenance
1. The diameter of the traction roller used for the conveyor belt should be reasonable to avoid selecting too small,
Excessive bending of the belt body can shorten its service life.
2. The installation of the tape should be correct to prevent belt wear caused by deviation.
3. Do not connect conveyor belts of different varieties, models, and specifications together
Use.
4. Avoid overloading when using, and do not exceed the maximum operating force designed with the belt
Great inflationary power.
5. Protective measures should be taken when using gas cutting or welding machines around conveyor belts
Measures to prevent damage to the conveyor belt.
6. If the conveyor belt is damaged, it should be repaired in a timely manner to avoid minor hazards
Causing significant losses.